FRAME FINISH: Electro statically-applied powder coat for uniform adhesion, baked to produce a durable, attractive, low maintenance finish. Standard Colours: lace white, gloss black, charcoal.

PAD ADJUSTMENT: Our unique “Level Lock” system allows adjustment in the user position. Tubes are chrome plated with a milled slot holding bolt numerical decal to accurately reproduce position settings.

SERVICING: Equipment is virtually maintenance free. Odourless/colourless grease unit for general mintenance of biangular units. Teflon spray is provided. We hold spare kevlar belts, cales, etc.

SERVICE AGENT: This is handled by Sprint Technical Services. For further information, please contact us.

THREE LAYER PAD CONSTRUCTION: Backboards are Ύ” plywood, drilled on fixtures and anchored with 5/16” x 18 T-nuts. Appropriate density, weight and thickness rebound foam is glued to the board. Seat and back pads have minimum 2” foam, wrapped with a thin layer of perspiration-proof plastic, then wrapped with a mounting layer to prevent board / upholstery contact. Covers are double stitched, superior grade, sulfide-stain resistant Boltaflex ® upholstery. Protective pad wear covers applied where needed.

HANDLES: Ergonomically designed handles provide for proper hand position throughout the full range of motion.

LAYOUT SPACE: All Magnum units are designed to fit into minimum space.

COUNTER-WEIGHTED WRMA: Designed, where applicable, to effectively eliminate machine arm weight.

RUBBER BOOTS: Fitted to flat steel feet welded to leg bottom to protect floor covering and prevent equipment shift in use.

PIVOT POINTS: Pre-lubricated, sealed ball bearings in pillow blocks are fitted into every pivot point for precise alignment and friction-free movement.

LEVER LOCK: Hold hands on either side of the seat & lift & seat will click into position. To lower press lever lock down.